Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
Our crews are certified, insured and equipped for hardwood floor water damage. They find the hidden moisture and dry it properly.
We look at the damage, explain what it needs and give you a written price before we start.
Most people who call us have never dealt with hardwood floor water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
It does not take long for water to change a wood floor. Boards take on moisture from below and from the edges, swell against each other and start to cup, with the edges rising higher than the center. A floor in this condition is not necessarily ruined. Boards of solid wood often return to flat if they are dried during those early days. What matters is removing moisture from the wood and from its subfloor steadily and under control.
We dry hardwood with floor drying mats. A vacuum unit attached to the sealed mats lifts water out by way of the seams and the wood itself, and dehumidifiers hold the room air at a dry level. This takes longer than drying carpet or drywall, often a week or more. No sanding should happen before the wood has dried completely. Sand a cupped floor too soon and it will crown later.
We take readings on the boards, the subfloor and unaffected flooring nearby for comparison. From those numbers we learn the depth of the water and if the floor can realistically be saved.
Rugs and furnishings come off the affected boards while pooled water is vacuumed up at once. Boards swell less when the seams stop taking in water sooner.
We tape drying mats to the floor and attach them to a vacuum system, which draws moisture upward through the wood. To avoid cracking, dehumidifiers keep conditions steady and the wood dries at an even rate.
We track readings every day or two until boards and subfloor match dry reference areas. At that point you hear from us if it needs nothing, some replacement boards, or a refinish.
Seams let the water through, and it fans out in the layer between flooring and subfloor. You can towel off the top and still have a saturated underside.
Swelling sets in and board edges lift. A cloudy look can appear in the finish. The bare underside of the boards and the subfloor are where mold can start.
Swelling builds pressure across the floor. Edges get crushed together, nails work loose and parts of the floor may start rising from the subfloor.
Black stains, buckled boards and mold beneath the flooring are now probable. Drying is usually no longer enough, and the bulk of the wet flooring has to be replaced.
Between the boards and the subfloor there is only darkness and still air. You will smell it before you see it, because nothing shows on the surface.
Staples and flooring nails corrode when moisture lingers, and their grip weakens. It can leave black staining around each fastener that goes deeper than a sanding reaches.
The subfloor can hold moisture long after the boards feel dry. Unless that layer is dried as well, expect renewed cupping or mold on the underside.
Moisture beneath flooring does not stay put. Next door rooms, the area under cabinets and walls, and the ceiling below are all places it can end up.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (505) 233-1866| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Floor finish | Light clouding that clears or buffs out once dry | Peeling or stained finish, which needs a sand and refinish |
| Paper or felt underlayment | Paper underlayment left in place when the floor dries flat | Any paper or felt under removed flooring, and all moldy sections |
| Solid hardwood | Cupped boards still fastened down, when drying starts within days | Sewage exposure of any kind, or wood that is split, black or buckled |
| OSB or particle board | Panels of OSB with edges still flat and unswollen | OSB with puffed edges, and almost all particle board that got wet |
| Engineered hardwood | Planks wet only briefly on the surface, edges still tight | Planks that are delaminating, swollen or wet underneath |
Have a different question? Call us and we will answer it over the phone.
Call (505) 233-1866Don't wait for small problems to become expensive emergencies. Call Torrance Restoration for fast, reliable service.
Call (505) 233-1866 Now